Simple jQuery Dropdowns
Please use this identifier to cite or link to this item: http://repository.li.mahidol.ac.th/dspace/handle/123456789/14177
Title: Comparison of mechanical properties between thai orthodontic elastics with different ammonia contents and commercial orthodontic elastics
Authors: Niwat Anuwongnukroh
Porntiwa Senarak
Surachai Dechkunakorn
Theeralaksna Suddhasthira
Chaveewan Kongkaew
Surapich Loykulnant
Wassana Wichai
Sopita Jitboon
Mahidol University
Thailand National Metal and Materials Technology Center
Keywords: Engineering
Issue Date: 1-Jan-2012
Citation: Advanced Materials Research. Vol.378-379, (2012), 580-584
Abstract: Introduction: The most widely used preservative system for natural rubber latex to date is the ammonia-based system preventing spontaneous coagulation and putrefaction due mainly to bacteria contamination. Objectives: The study compared 2 types of Thai orthodontic elastics, produced from natural rubber latex with different ammonia contents with commercial orthodontic elastics in terms of initial extension force, residual force, force loss, swelling index, breaking strength and maximum displacement. Materials and Methods: Thai orthodontic elastics were developed from 2 types of natural rubber latex; low ammonia < 0.15% (Thai-L), and high ammonia not < 0.6% (Thai-H). The mechanical properties of Thai orthodontic elastics were compared with commercial elastics (Ormco). Mechanical properties were tested using a universal testing machine (Instron 5566). Data were analyzed by One-way ANOVA and Tukey's test compared the measurements among groups. Results: Ormco had the highest initial extension force and showed significant differences with Thai-L and Thai-H. Thai-L had the highest residual force but showed no significant difference compared with Ormco. Thai-L had the lowest percent of force loss and showed significant differences with Thai-H and Ormco. Thai-L had lower force loss than Thai-H. For swelling index, Thai-L had the highest elasticity. For breaking strength and maximum displacement, both Thai elastics met the Australian Standard (AS) for breaking strength and maximum displacement, similar to Ormco elastics. Conclusion: All elastics met the specifications of the AS for breaking strength and maximum displacement. Thai-L had comparable properties with commercial orthodontic elastics in terms of mechanical properties. Thai-L had comparable properties with Ormco in terms of mechanical properties and may be developed for orthodontic purposes.
URI: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=80955133074&origin=inward
http://repository.li.mahidol.ac.th/dspace/handle/123456789/14177
ISSN: 10226680
Appears in Collections:Scopus 2011-2015

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.