Simple jQuery Dropdowns
Please use this identifier to cite or link to this item:
Title: Chemometrics-assisted cross injection analysis for simultaneous determination of phosphate and silicate
Authors: Kanchana Uraisin
Supavita Janya
Chutima Phechkrajang
Nathawut Choengchan
Warawut Tiyapongpattana
Víctor Cerdà
Duangjai Nacapricha
Flow Innovation-Research for Science and Technology Laboratories (FIRST Labs.)
Mahidol University
King Mongkut's Institute of Technology Ladkrabang
Thammasat University
Universitat de les Illes Balears
Keywords: Agricultural and Biological Sciences;Chemistry;Environmental Science;Medicine
Issue Date: 14-Jul-2016
Citation: International Journal of Environmental Analytical Chemistry. Vol.96, No.9 (2016), 886-903
Abstract: © 2016 Informa UK Limited, trading as Taylor & Francis Group. This work presents a novel method for simultaneous spectrophotometric determination of phosphate and silicate by using a cross injection analysis (CIA) coupled with the use of partial least squares (PLS) for data evaluation. The detection principle is based on the well-known ‘molybdenum blue’ method. The molybdate ions in the presence of stannous chloride in acidic medium give phosphomolybdenum blue and silicomolybdenum blue as products. In this work, all the liquids, including sample and reagents were simultaneously introduced into a CIA platform by using two peristaltic pumps for controlling the x-channel and y-channel flow which was automatically manipulated by using in-house control board. Crossflow provides sufficient mixing inside the platform prior detection of the absorption spectra of blue complexes in the wavelength of 400–900 nm. Since spectra of the blue colour product of phosphate and silicate are resemblant, these two analytes therefore reciprocally interfere with one another. This results in difficulty in simultaneous analysis of phosphate and silicate. In this work, PLS was utilised as assistor of CIA system for simultaneous analysis of phosphate and silicate using molybdenum blue reaction without using any modification of reagents and addition of selective masking agent. The calibration ranges are 0.1–6 mgP L−1 and 5–100 mgSi L−1 for phosphate and silicate, respectively. By using CIA coupled with PLS for data evaluation, the analysis of two analytes was achieved within 1.5 min with only single injection. The developed system was applied to natural water samples and the system was validated with the conventional methods. By statistical paired t-test, there was no evidence of significant difference at 95% confidence level (tstat = 2.28, tcritical = 2.31 and tstat = 0.62, tcritical = 2.31 for phosphate and silicate, respectively). This implied that the chemometrics-assisted CIA system was successfully developed for simultaneous spectrophotometric determination of phosphate and silicate.
ISSN: 10290397
Appears in Collections:Scopus 2016-2017

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.