Please use this identifier to cite or link to this item: http://repository.li.mahidol.ac.th/dspace/handle/123456789/40600
Title: A sacrificial process for fabrication of biodegradable polymer membranes with submicron thickness
Authors: Luke A. Beardslee
Judith Stolwijk
Dimitrius A. Khaladj
Mohamed Trebak
Justin Halman
Karen Y. Torrejon
Nuttawee Niamsiri
Magnus Bergkvist
University at Albany State University of New York
Mahidol University
Keywords: Engineering;Materials Science
Issue Date: 1-Aug-2016
Citation: Journal of Biomedical Materials Research - Part B Applied Biomaterials. Vol.104, No.6 (2016), 1192-1201
Abstract: © 2015 Wiley Periodicals, Inc. A new sacrificial molding process using a single mask has been developed to fabricate ultrathin 2-dimensional membranes from several biocompatible polymeric materials. The fabrication process is similar to a sacrificial microelectromechanical systems (MEMS) process flow, where a mold is created from a material that can be coated with a biodegradable polymer and subsequently etched away, leaving behind a very thin polymer membrane. In this work, two different sacrificial mold materials, silicon dioxide (SiO2) and Liftoff Resist (LOR) were used. Three different biodegradable materials; polycaprolactone (PCL), poly(lactic-co-glycolic acid) (PLGA), and polyglycidyl methacrylate (PGMA), were chosen as model polymers. We demonstrate that this process is capable of fabricating 200-500 nm thin, through-hole polymer membranes with various geometries, pore-sizes and spatial features approaching 2.5 µm using a mold fabricated via a single contact photolithography exposure. In addition, the membranes can be mounted to support rings made from either SU8 or PCL for easy handling after release. Cell culture compatibility of the fabricated membranes was evaluated with human dermal microvascular endothelial cells (HDMECs) seeded onto the ultrathin porous membranes, where the cells grew and formed confluent layers with well-established cell-cell contacts. Furthermore, human trabecular meshwork cells (HTMCs) cultured on these scaffolds showed similar proliferation as on flat PCL substrates, further validating its compatibility. All together, these results demonstrated the feasibility of our sacrificial fabrication process to produce biocompatible, ultra-thin membranes with defined microstructures (i.e., pores) with the potential to be used as substrates for tissue engineering applications. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1192–1201, 2016.
URI: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84978760231&origin=inward
http://repository.li.mahidol.ac.th/dspace/handle/123456789/40600
ISSN: 15524981
15524973
Appears in Collections:Scopus 2016-2017

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.