Simple jQuery Dropdowns
Please use this identifier to cite or link to this item:
Title: Importance of hydrogen and bio-oil inlet temperature during the hydrotreatment of bio-oil
Authors: Mortaza Gholizadeh
Richard Gunawan
Xun Hu
Sri Kadarwati
Roel Westerhof
Weerawut Chaiwat
Md Mahmudul Hasan
Chun Zhu Li
Curtin University
Mahidol University
Keywords: Chemical Engineering;Energy
Issue Date: 1-Sep-2016
Citation: Fuel Processing Technology. Vol.150, (2016), 132-140
Abstract: © 2016 Elsevier B.V. This paper reports the effects of hydrogen and bio-oil inlet temperature on the coke formation and product distribution during the hydrotreatment of bio-oil. A bench scale continuous hydrotreatment fixed-bed reactor set-up was used with pre-sulphided NiMo/γ-Al2O3 as the catalyst. The temperature of hot fluidised sand bath in which the hydrotreatment reactor was immersed was set at 390 °C while the pressure at the reactor exit was kept at around 70 bar. An LHSV of 1 h−1 (on the basis of organics in the bio-oil feed) was used. Our results show that the presence of hot hydrogen in the injection point of bio-oil to the reactor reduced the coke formation and reactor blockage for prolonged catalyst activity. This was due to the enhanced cracking and minimised polymerisation of bio-oil fragments when hot hydrogen was used to heat and activate the catalyst at the injection point. Moreover, lighter products with less coking propensity and smaller aromatic ring systems were formed when the injection point was maintained at a higher temperature with the use of hot hydrogen. These results indicate that the coke formation during hydrotreatment is at least partly because of the slow heating up of the bio-oil and the resulting bond breakage not being matched by the supply of active hydrogen from the catalyst.
ISSN: 03783820
Appears in Collections:Scopus 2016-2017

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.