Simple jQuery Dropdowns
Please use this identifier to cite or link to this item:
Title: Natural Kaolin-Based Ni Catalysts for CO<inf>2</inf>Methanation: On the Effect of Ce Enhancement and Microwave-Assisted Hydrothermal Synthesis
Authors: Kritchakorn Aimdate
Atthapon Srifa
Wanida Koo-Amornpattana
Chularat Sakdaronnarong
Wantana Klysubun
Sirapassorn Kiatphuengporn
Suttichai Assabumrungrat
Suwimol Wongsakulphasatch
Watchareeya Kaveevivitchai
Masao Sudoh
Ryo Watanabe
Choji Fukuhara
Sakhon Ratchahat
Shizuoka University
King Mongkut's University of Technology North Bangkok
Chulalongkorn University
Thailand National Nanotechnology Center
National Cheng Kung University
Mahidol University
Amano Institute of Technology
Synchrotron Light Research Institute
Keywords: Chemical Engineering;Chemistry
Issue Date: 1-Jun-2021
Citation: ACS Omega. Vol.6, No.21 (2021), 13779-13794
Abstract: Natural kaolin-based Ni catalysts have been developed for low-temperature CO2 methanation. The catalysts were prepared via a one-step co-impregnation of Ni and Ce onto a natural kaolin-derived metakaolin using a microwave-assisted hydrothermal method as an acid-/base-free synthesis method. The influences of microwave irradiation and Ce promotion on the catalytic enhancement including the CO2 conversion, CH4 selectivity, and CH4 yield were experimentally investigated by a catalytic test of as-prepared catalysts in a fixed-bed tubular reactor. The relationship between the catalyst properties and its methanation activities was revealed by various characterization techniques including X-ray fluorescence, X-ray diffraction, Brunauer-Emmett-Teller, scanning electron microscopy, selected area electron diffraction, transmission electron microscopy, elemental mapping, H2 temperature-programmed reduction, and X-ray absorption near-edge structure analyses. Among the two enhancement methods, microwave and Ce promotion, the microwave-assisted synthesis could produce a catalyst containing highly dispersed Ni particles with a smaller Ni crystallite size and higher catalyst reducibility, resulting in a higher CO2 conversion from 1.6 to 7.5% and a better CH4 selectivity from 76.3 to 79.9% at 300 °C. Meanwhile, the enhancement by Ce addition exhibited a great improvement on the catalyst activities. It was experimentally found that the CO2 conversion increased approximately 7-fold from 7.5 to 52.9%, while the CH4 selectivity significantly improved from 79.9 to 98.0% at 300 °C. Though the microwave-assisted synthesis could further improve the catalyst activities of Ce-promoted catalysts, the Ce addition exhibited a more prominent impact than the microwave enhancement. Cerium oxide (CeO2) improved the catalyst activities through mechanisms of higher CO2 adsorption capacity with its basic sites and the unique structure of CeO2 with a reversible valence change of Ce4+ and Ce3+ and high oxygen vacancies. However, it was found that the catalyst prepared by microwave-assisted synthesis and Ce promotion proved to be the optimum catalyst in this study. Therefore, the present work demonstrated the potential to synthesize a nickel-based catalyst with improved catalytic activities by adding a small amount of Ce as a catalytic promoter and employing microwave irradiation for improving the Ni dispersion.
ISSN: 24701343
Appears in Collections:Scopus 2021

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.