Taweechai AmornsakchaiBudsaporn SinpatanapanSauvarop Bualek-LimcharoenWiriya MeesiriMahidol UniversityRoyal Thai Air Force2018-09-072018-09-071999-05-01Polymer. Vol.40, No.11 (1999), 2993-2999003238612-s2.0-0033136499https://repository.li.mahidol.ac.th/handle/123456789/25381Aramid fibre, poly-m-phenylene isophthalamide (Teijin-Conex), was used to reinforce thermoplastic elastomer, styrene (ethylene butylene) styrene (SEBS). It was found that the moduli at 100 and 300% elongation of the composite increased linearly with increasing fibre loading. On the other hand, tensile strength of the composites decreased as the fibre content was increased. Improvement of interfacial adhesion was carried out by, first, slightly hydrolysing the fibre with sodium hydroxide solution to increase the number of reactive amino end groups and then mixing with the matrix and compatibiliser, maleic anhydride grafted SEBS (MA-g-SEBS), at various concentrations. Tensile strength of the compatibilised composite was found to increase and then level-off at 5 wt% compatibiliser. Fractured surface of composite containing compatibiliser showed more fibre breakage than the uncompatibilised one. Examination of the extracted fibre revealed that some fraction of rubber was chemically bonded to the fibre surface. These results suggest good compatibilising performance of MA-g-SEBS for the system studied. (C) 1999 Elsevier Science Ltd.Mahidol UniversityChemistryMaterials ScienceArticleSCOPUS10.1016/S0032-3861(98)00524-2