Publication: Two-dimensional solid-state array detectors: A technique for in vivo dose verification in a variable effective area
Issued Date
2019-11-01
Resource Type
ISSN
15269914
Other identifier(s)
2-s2.0-85074412109
Rights
Mahidol University
Rights Holder(s)
SCOPUS
Bibliographic Citation
Journal of Applied Clinical Medical Physics. Vol.20, No.11 (2019), 88-94
Suggested Citation
Kananan Utitsarn, Giordano Biasi, Nauljun Stansook, Ziyad A. Alrowaili, Marco Petasecca, Martin Carolan, Vladimir L. Perevertaylo, Wolfgang A. Tomé, Tomas Kron, Michael L.F. Lerch, Anatoly B. Rosenfeld Two-dimensional solid-state array detectors: A technique for in vivo dose verification in a variable effective area. Journal of Applied Clinical Medical Physics. Vol.20, No.11 (2019), 88-94. doi:10.1002/acm2.12744 Retrieved from: https://repository.li.mahidol.ac.th/handle/20.500.14594/51345
Research Projects
Organizational Units
Authors
Journal Issue
Thesis
Title
Two-dimensional solid-state array detectors: A technique for in vivo dose verification in a variable effective area
Abstract
© 2019 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine Purpose: We introduce a technique that employs a 2D detector in transmission mode (TM) to verify dose maps at a depth of dmax in Solid Water. TM measurements, when taken at a different surface-to-detector distance (SDD), allow for the area at dmax (in which the dose map is calculated) to be adjusted. Methods: We considered the detector prototype “MP512” (an array of 512 diode-sensitive volumes, 2 mm spatial resolution). Measurements in transmission mode were taken at SDDs in the range from 0.3 to 24 cm. Dose mode (DM) measurements were made at dmax in Solid Water. We considered radiation fields in the range from 2 × 2 cm2 to 10 × 10 cm2, produced by 6 MV flattened photon beams; we derived a relationship between DM and TM measurements as a function of SDD and field size. The relationship was used to calculate, from TM measurements at 4 and 24 cm SDD, dose maps at dmax in fields of 1 × 1 cm2 and 4 × 4 cm2, and in IMRT fields. Calculations were cross-checked (gamma analysis) with the treatment planning system and with measurements (MP512, films, ionization chamber). Results: In the square fields, calculations agreed with measurements to within ±2.36%. In the IMRT fields, using acceptance criteria of 3%/3 mm, 2%/2 mm, 1%/1 mm, calculations had respective gamma passing rates greater than 96.89%, 90.50%, 62.20% (for a 4 cm SSD); and greater than 97.22%, 93.80%, 59.00% (for a 24 cm SSD). Lower rates (1%/1 mm criterion) can be explained by submillimeter misalignments, dose averaging in calculations, noise artifacts in film dosimetry. Conclusions: It is possible to perform TM measurements at the SSD which produces the best fit between the area at dmax in which the dose map is calculated and the size of the monitored target.