Publication: Determination of material property for non-pneumatic tire spokes by inverse method
2
Issued Date
2018-01-01
Resource Type
ISSN
10139826
Other identifier(s)
2-s2.0-85054783573
Rights
Mahidol University
Rights Holder(s)
SCOPUS
Bibliographic Citation
Key Engineering Materials. Vol.777 KEM, (2018), 411-415
Suggested Citation
Ravivat Rugsaj, Chakrit Suvanjumrat Determination of material property for non-pneumatic tire spokes by inverse method. Key Engineering Materials. Vol.777 KEM, (2018), 411-415. doi:10.4028/www.scientific.net/KEM.777.411 Retrieved from: https://repository.li.mahidol.ac.th/handle/123456789/45836
Research Projects
Organizational Units
Authors
Journal Issue
Thesis
Title
Determination of material property for non-pneumatic tire spokes by inverse method
Author(s)
Other Contributor(s)
Abstract
© 2018 Trans Tech Publications, Switzerland. The radial spokes of non-pneumatic tire have been developed to absorb impacts. In order to obtain its property for the further developments, it had to cut into the curve beam specimens. The 3-point bending was selected to test referring to ASTM D790. Subsequently, the finite element method was employed to simulate the 3-point bending test of specimens. The inverse method was used to determine the modulus of elasticity for specimen material. The gradient based on optimization scheme was used to optimize the modulus of elasticity by the input and output condition which was the vertical deflection and force, respectively. The optimized process was terminated at the desirable force tolerance of 0.00071 N. The elastic modulus of spoke was implemented in the finite element model of the 3-point bending test. There was found that the simulation result of vertical displacement obtained an average error of 4.87% by comparing with physical experiment.