Publication: Adsorptive performance of activated carbon reused from household drinking water filter for hexavalent chromium-contaminated water
Issued Date
2020-10-15
Resource Type
ISSN
10958630
03014797
03014797
Other identifier(s)
2-s2.0-85088301623
Rights
Mahidol University
Rights Holder(s)
SCOPUS
Bibliographic Citation
Journal of Environmental Management. Vol.272, (2020)
Suggested Citation
Sirirat Sangkarak, Athit Phetrak, Suthirat Kittipongvises, Duangta Kitkaew, Doungkamon Phihusut, Jenyuk Lohwacharin Adsorptive performance of activated carbon reused from household drinking water filter for hexavalent chromium-contaminated water. Journal of Environmental Management. Vol.272, (2020). doi:10.1016/j.jenvman.2020.111085 Retrieved from: https://repository.li.mahidol.ac.th/handle/20.500.14594/57907
Research Projects
Organizational Units
Authors
Journal Issue
Thesis
Title
Adsorptive performance of activated carbon reused from household drinking water filter for hexavalent chromium-contaminated water
Other Contributor(s)
Abstract
© 2020 Elsevier Ltd Powdered activated carbon blocks (PACBs) are waste products obtained from household drinking water purification systems. In this study, we demonstrate that they can be used as adsorbents for the cost-effective and environmentally benign removal of hexavalent chromium (Cr(VI)) from contaminated-water and rinse electroplating wastewater. To evaluate Cr(VI) sorption onto the PACB, studies on equilibrium, kinetics, and thermodynamics were performed using batch mode experiments. The experimental results indicated that Cr(VI) ions were efficiently adsorbed under acidic conditions (i.e., at initial pH below 3) and low initial Cr(VI) concentrations. The adsorptive behaviors of the PACB for Cr(VI) were well explained by the Langmuir isotherm, as well as pseudo-second-order kinetic models, suggesting that a Cr(VI) monolayer was adsorbed onto the PACB surface via chemisorption. The maximum adsorption capacity of Cr(VI) onto the PACB was determined to be 6.207 mg/g. The results of thermodynamic studies revealed that the adsorption process of Cr(VI) onto PACB was endothermic and non-spontaneous. Additionally, analysis of the PACB after Cr(VI) adsorption at an initial pH of 2 using scanning electron microscopy, energy dispersive spectrometry, Fourier transform infrared spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) revealed that the interaction between the surface oxygenic functional groups on the PACB and Cr(VI) was primarily responsible for Cr(VI) sorption via surface complexation and electrostatic interactions. Based on the result of XPS analysis, the presence of trivalent chromium on the PACB surfaces indicated that some synergistic redox reactions involving Cr(VI) could have occurred during the sorption process. Although a commercially available powdered activated carbon outperformed the PACB adsorbent with respect to Cr(VI) removal from wastewater, complete Cr(VI) adsorption could be achieved using relatively large quantities of the PACB. These findings indicate that the PACB adsorbent could be used as a cheap and efficient material for the removal of Cr(VI) from wastewater.