Publication: Piezoelectric properties of Fe<inf>2</inf>O<inf>3</inf>-doped (1 - X)BiScO<inf>3</inf>-xPbTiO<inf>3</inf>ceramics
Issued Date
2005-08-26
Resource Type
ISSN
09244247
Other identifier(s)
2-s2.0-23344440568
Rights
Mahidol University
Rights Holder(s)
SCOPUS
Bibliographic Citation
Sensors and Actuators, A: Physical. Vol.122, No.2 (2005), 257-263
Suggested Citation
Pongtip Winotai, Nitinai Udomkan, Siwaporn Meejoo Piezoelectric properties of Fe<inf>2</inf>O<inf>3</inf>-doped (1 - X)BiScO<inf>3</inf>-xPbTiO<inf>3</inf>ceramics. Sensors and Actuators, A: Physical. Vol.122, No.2 (2005), 257-263. doi:10.1016/j.sna.2005.06.008 Retrieved from: https://repository.li.mahidol.ac.th/handle/20.500.14594/16510
Research Projects
Organizational Units
Authors
Journal Issue
Thesis
Title
Piezoelectric properties of Fe<inf>2</inf>O<inf>3</inf>-doped (1 - X)BiScO<inf>3</inf>-xPbTiO<inf>3</inf>ceramics
Author(s)
Other Contributor(s)
Abstract
Effects of Fe substituents on bismuth scandium lead titanate ceramics (1 - x)BiScO3-xPbTiO3(BSPT) at x = 0.64 were investigated in order to improve the piezoelectric properties. The density of Fe-doped BSPT ceramics tends to slightly decrease when Fe contents increase; except at 1.50 mol% Fe at which the highest density value about 7.43 g/cm3is achieved. The Rietveld refinements of crystal structure of all samples show that they are of pure tetragonal phase. The Curie temperature (Tc) increases with doping Fe content and the highest Tcof 451 °C is reached for 2 mol% Fe-doped BSPT sample. All these ceramics yield higher Curie temperatures (Tc) than that of PbZr0.52Ti0.48O3(386 °C), the standard piezoceramics. Meanwhile, the dielectric constant and piezoelectric properties of the Fe-doped BSPT samples were significantly improved compared with those of the undoped sample. Electron spin resonance spectra clearly show that the iron is in the valence state 3+, which indicates that Fe3+ions replace either Ti4+or Sc3+at B-sites. This gives rise to oxygen vacancies to maintain the charge balance and results in three Fe3+ESR signals. The first and the third asymmetric signals at around 100 and 300 mT clearly arise from octahedral sites. The second ESR broad peak at around 190 mT implies that the neighboring O2-vacancies are randomly distributed. It is evident that the 1 mol% Fe-doped sample yields the best over all piezoelectric properties. Furthermore, these new enhanced-piezoelectric materials can effectively reduce at least 36 mol% of the lead content in the ceramics employed in the high power applications so that they are more environmentally friendlier. © 2005 Published by Elsevier B.V.