Intermediate matching layer for light-induced performance and removable clip-on applications of four-terminal perovskite/silicon heterojunction tandem solar cells
Issued Date
2023-05-01
Resource Type
ISSN
09270248
Scopus ID
2-s2.0-85148325536
Journal Title
Solar Energy Materials and Solar Cells
Volume
253
Rights Holder(s)
SCOPUS
Bibliographic Citation
Solar Energy Materials and Solar Cells Vol.253 (2023)
Suggested Citation
Sanglee K., Sakunkaewkasem S., Piromjit C., Nukunudompanich M., Kanjanaboos P., Chuangchote S., Suttiruengwong S., Sahasithiwat S., Limmanee A., Krajangsang T. Intermediate matching layer for light-induced performance and removable clip-on applications of four-terminal perovskite/silicon heterojunction tandem solar cells. Solar Energy Materials and Solar Cells Vol.253 (2023). doi:10.1016/j.solmat.2023.112235 Retrieved from: https://repository.li.mahidol.ac.th/handle/20.500.14594/81385
Title
Intermediate matching layer for light-induced performance and removable clip-on applications of four-terminal perovskite/silicon heterojunction tandem solar cells
Other Contributor(s)
Abstract
Perovskite/silicon tandem solar cells are one of the most efficient ways to improve the performance of the photovoltaic industry and should be viewed as a promising path in the photovoltaic field. The silicon photovoltaic modules have a lifespan of over 20 years, while the low device stability of perovskite solar cells (PSCs) remains a significant commercialization barrier. An air gap acts as an optical spacer layer for four terminal (4T) perovskite/silicon tandem cells, resulting in a loss of efficiency. Using polydimethylsiloxane (PDMS) as an intermediate matching layer (IML) and a clip-on design made of a PDMS-based material sandwiched between polyvinyl chloride (PVC) layers with the configuration of PVC/IML/PVC, this research not only achieved efficiency improvement of four-contact tandem solar cells but also greatly simplified disassembly of individual cells. The 4T perovskite/silicon heterojunction tandem cells with a clip-on design achieved the highest efficiency of 23.49% for the active area of 1 cm2, while the fully tandem configuration without a clip-on layer only exhibited a PCE of 22.83%. The clip-on technology has the potential to boost the current density of silicon heterojunction solar cells from 15.01 mA/cm2 (for the filtered bottom cell with an air gap) up to 16.51 mA/cm2 (for the filtered bottom cell with a clip-on). Therefore, this state-of-the-art allows for the removal of PSCs with a shorter lifespan while adhering two photovoltaic cells together securely and effectively.