Influence of the liquid ionic strength on the resonance frequency and shell parameters of lipid-coated microbubbles
Issued Date
2024-06-15
Resource Type
ISSN
00219797
eISSN
10957103
Scopus ID
2-s2.0-85187801422
Journal Title
Journal of Colloid and Interface Science
Volume
664
Start Page
533
End Page
538
Rights Holder(s)
SCOPUS
Bibliographic Citation
Journal of Colloid and Interface Science Vol.664 (2024) , 533-538
Suggested Citation
Sojahrood A.J., Yang C., Counil C., Nittachayarn P., Goertz D.E., Exner A.A., Kolios M.C. Influence of the liquid ionic strength on the resonance frequency and shell parameters of lipid-coated microbubbles. Journal of Colloid and Interface Science Vol.664 (2024) , 533-538. 538. doi:10.1016/j.jcis.2024.01.185 Retrieved from: https://repository.li.mahidol.ac.th/handle/123456789/97716
Title
Influence of the liquid ionic strength on the resonance frequency and shell parameters of lipid-coated microbubbles
Corresponding Author(s)
Other Contributor(s)
Abstract
The correct measurement of the resonance frequency and shell properties of coated microbubbles (MBs) is essential in understanding and optimizing their response to ultrasound (US) exposure parameters. In diagnostic and therapeutic ultrasound, MBs are typically surrounded by blood; however, the influence of the medium charges on the MB resonance frequency has not been systematically studied using controlled measurements. This study aims to measure the medium charge interactions on MB behavior by measuring the frequency-dependent attenuation of the same size MBs in mediums with different charge densities. In-house lipid-coated MBs with C3F8 gas core were formulated. The MBs were isolated to a mean size of 2.35 μm using differential centrifugation. MBs were diluted to ≈8×105 MBs/mL in distilled water (DW), Phosphate-Buffered Saline solution (PBS1x) and PBS10x. The frequency-dependent attenuation of the MBs solutions was measured using an aligned pair of PVDF transducers with a center frequency of 10MHz and 100% bandwidth in the linear oscillation regime (7 kPa pressure amplitude). The MB shell properties were estimated by fitting the linear equation to experiments. Using a pendant drop tension meter, the surface tension at the equilibrium of ≈6 mm diameter size drops of the same MB shell was measured inside DW, PBS1x and PBS10x. The surface tension at the C3F8/solution interface was estimated by fitting the Young-Laplace equation from the recorded images. The frequency of the peak attenuation at different salinity levels was 13, 7.5 and 6.25 MHz in DW, PBS1x and PBS-10x, respectively. The attenuation peak increased by ≈140% with increasing ion density. MBs' estimated shell elasticity decreased by 64% between DW and PBS-1x and 36% between PBS-1x and PBS-10x. The drop surface tension reduced by 10.5% between DW and PBS-1x and by 5% between PBS-1x and PBS-10x, respectively. Reduction in the shell stiffness is consistent with the drop surface tension measurements. The shell viscosity was reduced by ≈40% between DW and PBS-1x and 42% between PBS-1x and PBS-10x. The reduction in the fitted stiffness and viscosity is possibly due to the formation of a densely charged layer around the shell, further reducing the effective surface tension on the MBs. The changes in the resonance frequency and estimated shell parameters were significant and may potentially help to better understand and explain bubble behavior in applications.