Noise reduction of jewelry cleaning machine

dc.contributor.advisorPramuk Osiri
dc.contributor.advisorSomporn Kantharadussadee Triamchaisri
dc.contributor.advisorOrawan Kaewboonchoo
dc.contributor.authorJaruwan Ladorndoo
dc.date.accessioned2024-01-25T04:06:56Z
dc.date.available2024-01-25T04:06:56Z
dc.date.copyright2015
dc.date.created2024
dc.date.issued2015
dc.descriptionOccupational Health and Safety (Mahidol University 2015)
dc.description.abstractThe objective of this study is to learn and compare the noise levels from the processes of a jewelry cleaning machine. The result of workplace monitoring before the improvement found that the noise levels during an 8 hrs working a day was 92.5 dB(A). The workers that were exposed to noise above 85 dB(A) for 8 work hours caused by a jewelry cleaning machine (which is 54 cm wide, 110 cm long, and 110 cm high). Noise absorbent material, made from Elastomeric foam based on synthetic rubber, was installed on 6 sides of the internal machinery and rubber seals helped to reduce the spread of the noise and reduce sound transmission through the air. The noise levels were measured at 7 points at dB(A), dB(C) and at frequencies ranging from 125 Hz to 5 KHz. A comparison of the noise levels results between, before, and after, the improvements at the 7 points (front left, the front middle, the front right, the side, the back, the top, and the bottom) revealed that the noise levels decreased by 0.8-7.9 dB(C), with the biggest decrease at the frequency of 5 KHz.
dc.description.abstractวัตถุประสงค์ของการศึกษานี้ คือ เพื่อศึกษาระดับเสียงที่เกิดขึ้นจากการทำงานของเครื่องจักรที่มีในพื้นที่การทำงาน และเพื่อเปรียบเทียบระดับความดังเสียงก่อนและหลังการปรับปรุงเครื่องทำความสะอาดชิ้นงาน ผลจากการตรวจวัดระดับเสียงก่อนปรับปรุงตลอดระยะเวลาการทำงาน 8 ชั่วโมงในกระบวนการฉีดล้างชิ้นงานในอุตสาหกรรมผลิตและประกอบเครื่องประดับตรวจวัดได้ 92.5 dB (A) ซึ่งมากกว่าที่มาตรฐานกฎหมายกำหนดให้ผู้ปฎิบัติงานที่สัมผัสเสียงดังเกิน 85 dB (C) ใน 8 ชั่วโมงการทำงาน ซึ่งเป็นเสียงที่เกิดจากเครื่องทำความสะอาดชิ้นงานที่มีขนาด 54 ซม. ยาว 110 ซม. และสูง 110 ซม. ทำการติดตั้งวัสดุดูดซับเสียง Syntactic Rubber ภายใน เครื่องจักร ทั้งหมด 6 ด้าน และการติดแผ่นพลาสติกกั้นช่องสอดมือ เพื่อลดการแพร่ของเสียงและลดการส่งผ่านเสียงทางอากาศ และทำการตรวจวัดระดับเสียงจำนวน 7 จุด ที่ระดับ dB(A), dB(C) และ ระดับเสียงแยกความถี่ตั้งแต่ 125 Hz ถึง 5 KHz ผลการเปรียบเทียบระดับเสียงก่อนและหลังทำการปรับปรุงทั้ง 7 จุด ได้แก่ ด้านหน้าฝั่ง ซ้ายมือ, ด้านหน้าตรงกลาง, ด้านหน้าฝั่งขวา, ด้านข้าง, ด้านหลัง, ด้านบน และด้านล่าง พบว่าระดับเสียงลดลง 0.8-7.9 dB(C) ซึ่งส่วนใหญ่ระดับเสียงลดลงที่ความถี่สูงสุดคือ 5 KHz.
dc.format.extentxi ,91 leaves : ill.
dc.format.mimetypeapplication/pdf
dc.identifier.citationThesis (M.Sc. (Occupational Health and Safety))--Mahidol University, 2015
dc.identifier.urihttps://repository.li.mahidol.ac.th/handle/123456789/94053
dc.language.isoeng
dc.publisherMahidol University. Mahidol University Library and Knowledge Center
dc.rightsผลงานนี้เป็นลิขสิทธิ์ของมหาวิทยาลัยมหิดล ขอสงวนไว้สำหรับเพื่อการศึกษาเท่านั้น ต้องอ้างอิงแหล่งที่มา ห้ามดัดแปลงเนื้อหา และห้ามนำไปใช้เพื่อการค้า
dc.rights.holderMahidol University
dc.subjectDeafness, Noise induced
dc.subjectIndustrial noise
dc.subjectNoise control -- Equipment and supplies
dc.titleNoise reduction of jewelry cleaning machine
dc.title.alternativeการลดเสียงจากเครื่องล้างทำความสะอาดเครื่องประดับ
dc.typeMaster Thesis
dcterms.accessRightsopen access
mods.location.urlhttp://mulinet11.li.mahidol.ac.th/e-thesis/2557/cd498/5536387.pdf
thesis.degree.departmentFaculty of Public Health
thesis.degree.disciplineOccupational Health and Safety
thesis.degree.grantorMahidol University
thesis.degree.levelMaster's degree
thesis.degree.nameMaster of Science

Files