Publication: Blend film based on fish gelatine/curdlan for packaging applications: Spectral, microstructural and thermal characteristics
Issued Date
2015-01-01
Resource Type
ISSN
20462069
Other identifier(s)
2-s2.0-84948390489
Rights
Mahidol University
Rights Holder(s)
SCOPUS
Bibliographic Citation
RSC Advances. Vol.5, No.120 (2015), 99044-99057
Suggested Citation
Mehraj Ahmad, Nilesh Prakash Nirmal, Julalak Chuprom Blend film based on fish gelatine/curdlan for packaging applications: Spectral, microstructural and thermal characteristics. RSC Advances. Vol.5, No.120 (2015), 99044-99057. doi:10.1039/c5ra20925k Retrieved from: https://repository.li.mahidol.ac.th/handle/20.500.14594/35718
Research Projects
Organizational Units
Authors
Journal Issue
Thesis
Title
Blend film based on fish gelatine/curdlan for packaging applications: Spectral, microstructural and thermal characteristics
Author(s)
Other Contributor(s)
Abstract
© The Royal Society of Chemistry 2015. A series of novel fish gelatine/curdlan (FG/CL) blend films at different ratios (FG/CL ≈ 10:0, 8:2, 6:4, 5:5 and 0:10%, w/w) were successfully fabricated at pH 12 via a casting approach, and their physico-mechanical, spectral, microstructural and thermal properties were investigated as a function of CL content. FG/CL blend films exhibited lower tensile strength (TS) but higher elongation at break (EAB) and water vapour permeability (WVP), compared to FG film (P < 0.05). Increased contact angle () and moisture content (MC), but decreased water solubility (WS) were obtained for FG/CL blend films having the higher proportion of CL (P < 0.05). Furthermore, the addition of CL decreased a∗-(redness) and transparency values (P < 0.05), but enhanced L∗-(lightness), b∗-(yellowness) and ΔE∗-values (total colour difference) (P < 0.05) in FG/CL blend films. Light transmission in ultraviolet (UV) and visible regions (200-800 nm) was lowered in all FG/CL blend films, indicating excellent light barrier characteristics. Significant changes in molecular order and decreased intermolecular interactions in the matrix of FG/CL blend film were determined based on FTIR spectroscopy. TGA and DTG curves displayed that FG/CL (8:2) blend film had enhanced heat stability as evidenced by higher heat-stable mass residues (34.1%, w/w), compared to FG film (26.6%, w/w) in the temperature range of 50-600 °C. DSC thermogram suggested the solid-state morphology of FG/CL (8:2) blend film that consisted of amorphous/microcrystalline phase of partially miscible FG/CL aggregated junction zones and the coexisting of unbound CL domains. SEM micrographs elucidated that FG/CL (8:2) blend film was slightly rougher than FG film, but no signs of phase separation between film components were observed, thereby confirming its prospective use as food packaging material.