Publication: Hard coatings for CR-39 based on Al<inf>2</inf>O<inf>3</inf>–ZrO<inf>2</inf>3-glycidoxypropyltrimethoxysilane (GPTMS) and tetraethoxysilane (TEOS) nanocomposites
Issued Date
2016-07-01
Resource Type
ISSN
15734846
09280707
09280707
Other identifier(s)
2-s2.0-84961122063
Rights
Mahidol University
Rights Holder(s)
SCOPUS
Bibliographic Citation
Journal of Sol-Gel Science and Technology. Vol.79, No.1 (2016), 190-200
Suggested Citation
Rojcharin Chantarachindawong, Tanakorn Osotchan, Pongpan Chindaudom, Toemsak Srikhirin Hard coatings for CR-39 based on Al<inf>2</inf>O<inf>3</inf>–ZrO<inf>2</inf>3-glycidoxypropyltrimethoxysilane (GPTMS) and tetraethoxysilane (TEOS) nanocomposites. Journal of Sol-Gel Science and Technology. Vol.79, No.1 (2016), 190-200. doi:10.1007/s10971-016-4006-3 Retrieved from: https://repository.li.mahidol.ac.th/handle/20.500.14594/43328
Research Projects
Organizational Units
Authors
Journal Issue
Thesis
Title
Hard coatings for CR-39 based on Al<inf>2</inf>O<inf>3</inf>–ZrO<inf>2</inf>3-glycidoxypropyltrimethoxysilane (GPTMS) and tetraethoxysilane (TEOS) nanocomposites
Other Contributor(s)
Abstract
© 2016, Springer Science+Business Media New York. Abstract: The optical and mechanical properties of single layer nanocomposite films, with refractive indices (n) matched for an allyl diglycol carbonate (CR-39) substrate, with n = 1.50, were investigated. Alumina nanoparticles (ALO NPs 20 nm) and zirconia nanoparticles (ZrAc NPs 50 nm) in colloidal form were incorporated in the nanocomposites to improve film strength and control the refractive index. The coating solution was prepared from hydrolysis between tetraethoxysilane (TEOS) and 3-glycidoxypropyl trimethoxysilane (GPTMS) in the presence of colloidal nanoparticles. GPTMS functioned as a matrix for the nanocomposite film and promoted adhesion between the film and substrate. Meanwhile, TEOS, a four-armed crosslink network, provided internal structural strength through network formation. The optimum ratio of GPTMS:TEOS:NPs was at 28:12:24 by weight percent (wt%). The nanocomposite film with 24 wt% of ZrAc yielded a harder film with a slightly higher refractive index (n = 1.53 at 550 nm) than the CR-39 substrate (n = 1.51 at 550 nm). The film with 24 wt% of ALO showed a refractive index close to that of CR-39, but possessed poorer scratch resistance. The coating film at 12:12 wt% of ALO:ZrAc provided a refractive index suitable for the CR-39 substrate. The film also showed good scratch resistance, good adhesion, and excellent optical properties. Graphical Abstract: [Figure not available: see fulltext.]